Hettich Auto-Close Hinges Intermat

Full overlay: The door is in front of the cabinet wall and only a small gap remains at the side within which the door can open reliably. Alternatively, the door can also be overlaid fully, in which case sufficient space must be allowed at the side for the required mimimum reveal. Straight hinges are used.

Half overlay: This is where two doors are positioned in front of a cabinet centre panel. Each door has a small overlay and cranked hinges are therefore used.

Inset door: The door is positioned inside the cabinet i.e. next to the cabinet side. Highly cranked hinges are used. 

Intermat: Fast-assembly concealed hinges

Intermat 9943: For doors up to 25 mm thick. 110 degree opening angle

Intermat 9944: For doors up to 28 mm thick. 125 degree opening angle

Intermat 9956: For doors up to 24 mm thick. 165 degree opening angle

Intermat 9936: For profile doors up to 32 mm thick. 95 degree opening angle

Intermat 9935: For profile doors up to 43 mm thick. 95 degree opening angle

Intermat 9936 W90: For profile doors with face angle 90 degree. 95 degree opening angle

Intermat 9930: For corner unit folding doors. 50/65 degree opening angle